BD9S201NUX-C
車電用 2.7V～5.5V輸入 2A 1ch 同步整流降壓 DC/DC轉換器
BD9S201NUX-C
車電用 2.7V～5.5V輸入 2A 1ch 同步整流降壓 DC/DC轉換器
BD9S201NUX-C系列是內建低導通電阻的功率MOSFET的同步整流降壓型DC/DC轉換器。最大可輸出2A的電流。具有2.2MHz高速開關頻率，適用於小型電感。具有基於電流模式控制的高速瞬態回應性能。另外，內建相位補償電路，可用較少的外接零部件構建應用。
8-channel power tree Reference Design
For automotive ADAS and Info-Display
Product Detail
功能安全:
規格:
ch
1
Integrated FET / Controller
Integrated FET
Topology
Buck
Synchronous / Nonsynchronous
Synchronous
Vin1(Min.)[V]
2.7
Vin1(Max.)[V]
5.5
Vout1(Min.)[V]
0.8
Vout1(Max.)[V]
5.5
Iout1(Max.)[A]
2
SW frequency setting (Max.)[MHz]
2.2
Light Load mode
No
EN
Yes
PGOOD
Yes
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
125
Package Size [mm]
2.0x2.0 (t=0.6)
Common Standard
AEC-Q100 (Automotive Grade)
功能:
- AEC-Q100 Qualified (Grade 1)
- Single Synchronous Buck DC/DC Converter
- Adjustable Soft Start Function
- Output Discharge Function
- Power Good Output
- Input Under Voltage Lockout Protection (UVLO)
- Short Circuit Protection (SCP)
- Output Over Voltage Protection (OVP)
- Over Current Protection (OCP)
- Thermal Shutdown Protection (TSD)
參考設計 / 應用評估套件
-
- Evaluation Board - BD9S201NUX-TSB-001
This Evaluation Board was developed for ROHM's single Synchronous buck DC/DC converter BD9S201NUX-C. BD9S201NUX-C is a synchronous buck DC/DC converter with built-in low On Resistance power MOSFETs. The BD9S201NUX-C accepts a power supply input range of 2.7V to 5.5V and generates a maximum output current of 2A. BD9S201NUX-C generates an output voltage range of 0.8V to VIN using external resistors. BD9S201NUX-C is a current mode control DC/DC Converter and features high-speed transient response.
-
- Reference Design - REFRPT001
- CISPR25 Class5 compliant 8 rails power tree Reference Design for Automotive ADAS/Infotainment application
This reference design is a power tree solution board developed for infotainment devices such as automotive clusters and center information displays and for ECUs for ADAS application. The power system that can support functional safety is integrated on a single board to achieve the optimal configuration as a power tree. Excellent EMC performance that meets CISPR25 Class 5 even at all power supply rails are enabled, and reduces heat generation of each device by distributing high-efficiency DCDCs. In addition, two supervisor ICs with self-diagnosis functions can monitor the output of all power rails and contribute to a higher level of functional safety.
- Automotive Infotainment/ADAS 8-channels power tree reference design
- Verified to satisfy EMC CISPR 25 class 5 standard without common mode filter
- In order to avoid the AM radio frequency bands All DC/DC converters operate at a switching frequency of 2.2 MHz or higher.
- Thermal characteristics tested
- voltage monitoring for 8-channel power tree to improve the functional safety ASIL level
- Space saving by integrating multiple power trees
-
- Reference Design - REF67005
- Power Solution for Dolphin5 of Telechips's Infortainment SoC
ROHM has developed an optimal power supply reference design for Telechips's Infortainment SoC "Dolphin5". By providing an optimal power supply reference design for the "Dolphin5", ROHM is helping to reduce the development burden on designers and achieve the performance required by the market. Telechips's latest automotive SoC "Dolphin5", for which the reference design has been developed, will contribute to the enhancement of various in-vehicle applications, including cockpits.
Click here
for inquiries about Telechips's Infortainment SoC "Dolphin5".- Configurable PMIC (BD96805Qxx-C, BD96806Qxx-C, BD96811Fxx-C) optimized for use with "Dolphin5"
- 2.7V to 5.5V Input, 1A Single Synchronous Buck DC/DC Converter for Automotive (BD9S111NUX-C)
- 2.7V to 5.5V Input, 2A Single Synchronous Buck DC/DC Converter for Automotive (BD9S201NUX-C)
Related News:
2024-11-28 - ROHM SoC用PMIC導入Fabless設計公司Telechips新世代座艙電源參考設計
Videos & Catalogs
