單向車載充電器（OBC）
Block Diagram
*Click to enlarge image.
Topology Selection
When designing an electronic circuit, especially power system circuits, it is necessary to select a circuit configuration (topology) that meets the required specifications because input voltage, output voltage, power, isolation, etc. vary depending on the application. The selection of the most suitable components also differs depending on the topology. If the wrong components are selected, the required specifications cannot be met and the circuit design must be redone. The topology selection page provided by ROHM guides you through the selection of the best device for different topologies.
ROHM Solution Simulator
「ROHM Solution Simulator」是一款能在ROHM官網上運行的電子電路模擬工具。從零件選擇和元件單體驗證等研發初期階段到系統級的驗證階段，各項模擬工作都可以在Web上執行。
ROHM提供的SiC元件等功率元件產品、驅動IC和電源IC等IC產品，都可以在接近實際環境的解決方案電路中輕易地進行驗證，大幅縮短研發週期。
*需要註冊MyROHM方可使用。
影片
Industry-leading SiC Power and Gate Driver Solutions
Learn more about silicon carbide semiconductors and why they are the most promising material for use in power electronics due to the inherent advantages that SiC has over other materials.
Their lower loss, higher withstand voltage, faster switching capability, and superior thermal characteristics enable simpler designs that are more efficient, smaller, and lighter than silicon-based alternatives.
型錄
- xEV Solution Brochure (Devices for xEV)
-
- Power Device Catalog
-
- IPD / Smart Switch Brochure
-
- Automotive Regulator Selection Guide
-
- Next Generation Op Amp Brochure
-
