BU33TD2WNVX
1ch 200mA CMOS LDO Regulators
BU33TD2WNVX
1ch 200mA CMOS LDO Regulators
BU**TD2WNVX / BU**TD3WG系列是一款搭載超小型封裝SSON004X1010 (1.0mm×1.0mm×0.6mm) & SSOP5(2.9mm×2.8mm×1.15mm)的200mA輸出高性能FULL CMOS穩壓器。電路電流僅需35μA,並具備絕佳的干擾特性及負載反應特性,最適合應用於邏輯IC用電源、RF用電源、相機模組用電源等各種用途。
Product Detail
規格:
ch
1
Withstand Voltage (Max.)[V]
6.5
Vin(Min.)[V]
1.7
Vin(Max.)[V]
6
Iout(Max.)[A]
0.2
Vout Type
Fixed
Vout Accuracy
±1.0% (Ta=25℃)
Circuit Current[mA]
0.035
Dropout Voltage (Typ.)[V]
0.22(Io=0.2A)
Ripple Rejection [dB]
70
Load Regulation[mV]
10(Io=0.01mA to 100mA)
Output Capacitor[µF]
0.22
Shutdown Function
Yes
Thermal Shut-down
Yes
Over Current Protection
Yes
Over Voltage Protection
No
Under Voltage Lock Out
No
Discharge Function
Yes
Soft Start
No
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
85
功能:
・±1%的高精度輸出電壓(VOUT<2.5V的産品是±25mV)・高漣波抑制:70dB(Typ. 1kHz)
・對應小型陶瓷電容(CIN=Co=0.47µF)
參考設計 / 應用評估套件
-
- Reference Design - REF67011
- NFC Telemetry-Based Rotating Component Torque Sensing
In this reference design, a strain sensor and the ML7660-EVK-002 are attached to the shaft. It is now possible to directly measure and collect data on the strain of the rotating shaft, which was previously impossible.
Specifically, the measurement process follows these steps:
1) The power supply LSI wirelessly supplies power to the power receiving LSI.
2) The power receiving LSI supplies power to the strain sensor via a wired connection.
3) The strain sensor measures the strain of the rotating shaft.
4) The strain sensor sends the strain measurement data to the power receiving LSI via a wired connection.
5) The power receiving LSI wirelessly transmits the measurement data to the power supply LSI.This reference design uses the STREAL SR300 sensor manufactured by Glosel. If you plan to use Glosel sensors, please check directly with Glosel for availability and procurement details in advance.
https://www.glosel.co.jp/en/contact/