ROHM Product Detail

PMR100HZPFV
Ultra-low Ohmic Chip Resistors For Current Detection

料號 | PMR100HZPFV
狀態 | 推薦品
封裝 | PMR100
包裝形式 | Taping
單位數量 | 2000
最小包裝數量 | 2000
RoHS | Yes
長期供貨計畫 | 10 Years
 

Description

ROHM的電流檢測用超低電阻值晶片式電阻為適用於大電流電路的金屬板型電阻。且藉由獨特的不需雷射調整(Trimingless)結構,可提升電流檢測的精確度,適合用於大電流高速切換電路。

Product Detail

Specifications

Automotive grade

Yes

Size[mm](inch)

6432(2512)

Rated Power[W]

3, 2

Resistance Tolerance

F (±1%)

Resistance range[Ω]

1m to 4m

Resistance(Min.)[Ω]

0.001

Resistance(Max.)[Ω]

0.004

Temperature Coefficient[ppm/°C]

±75,±100

Operating Temperature[°C]

-65 to 175, -55 to 155

Type

For current sensing

Operating Temperature (Max.)[°C]

155

Common Standard

AEC-Q200 (Automotive Grade)

Features

・ROHM獨特的無需雷射調整構造,實現優異的散熱性
・對應從1mΩ開始的超低電阻值
・優異的電阻溫度特性(±150/±100ppm/℃)
・完全無鉛化

Lineup

* Fractions not supported (decimals only)

Reference Design / Evaluation Tool

    • Reference Design - REF68011
    • 20A Shunt-based current sensing (uni-direction) with CSA on 12V system
    • In the automotive and industrial equipment fields, current sensing circuits are essential for applications such as current feedback, overcurrent limitation, and battery level monitoring. The shunt-based current sensing circuit is the most standard circuit for current measurement and monitoring. ROHM provides solutions that leverage the resistor technology it has developed since its founding, as well as the analog and thermal design technologies it has cultivated over many years, contributing to improved system performance, higher power efficiency, and higher reliability through high-precision current sensing.

      The components you select will vary depending on the power supply system and detection current value. We have a lineup of reference designs for 12V, 24V, and 48V systems, as well as current sensing values from 20 to 100A. We publish not only the schematic design guide but also thermal evaluation data for shunt resistors. Thermal issues are an important factor in shunt-based current sensing. Please use these as design references to help reduce design man-hours.

      This reference design is designed for 20A, uni-direction current sensing on 12V systems.

X

Most Viewed