36V 2ch Stepping Motor Driver - BD68888MUV (新產品)

BD68888MUV is a bipolar low-consumption driver that driven by PWM constant current. Rated power supply voltage of the device is 36 V, and rated output current is 1.65 A. PARA-IN drive mode is adopted for input interface. This motor driver can drive 2ch bipolar stepping motors. In addition, the power supply can be driven by one single system, which siplifies the design.

* 本產品是標準級的產品。本產品不建議使用的車載設備。
料號 | BD68888MUV-E2
狀態 | 推薦品
封裝 | VQFN036V6060
單位數量 | 2000
最小包裝數量 | 2000
包裝形式 | Taping
RoHS | Yes

規格:

Grade

Standard

Vcc (Max.)[V]

36.0

Power Supply Voltage (Max.)[V]

28.0

Power Supply Voltage (Min.)[V]

8.0

Iout (Max.)[A]

1.65

Output On Resistance (Typ.)[Ω]

1.0

Interface

PARA-IN

Step

to 1 / 4

MIX DECAY Function

-

Single power supply input

Yes

Automotive class

No

Operating Temperature (Min.)[°C]

-25

Operating Temperature (Max.)[°C]

85

功能:

  • Two bipolar stepping motors can be driven
  • Rated Output Current 1.65 A/Phase
  • Low ON Resistance DMOS Output
  • PARA-IN Drive Mode correspondence
  • PWM Constant Current control (the other excitation method)
  • Built-in Spike Noise Blanking Function (external noise filter is unnecessary)
  • Full-, Half (two kinds)-, Quarter-step correspondence
  • Power Save Function
  • Built-in Logic Input Pull-down Resistor
  • Thermal Shutdown Circuit (TSD)
  • Over-current Protection Circuit (OCP)
  • Under Voltage Lockout Circuit (UVLO)
  • Over Voltage Lockout Circuit (OVLO)
  • Ghost Supply Prevention (protects against malfunction when power supply is disconnected)