常見問題
  • For BD37033FV-M,
    What is an example of register settings to use to produce an audio output?
    • By sending the following commands ① and ② in order, the A_single input can be output to 6 channels in through mode (VOLUME and FADER are 0dB).
      (In the case of I2C address = 0x40)
      ①RESET & INITIAL SETUP
      I2C
      Address
      Register
      Address
      SET
      Value
      0x400xFE0x81
      0x010xA4
      0x020x00
      0x030x01
      0x050x00
      0x060x80
      0x200xFF
      0x280xFF
      0x290xFF
      0x2A0xFF
      0x2B0xFF
      0x2C0xFF
      0x300xFF
      0x410x00
      0x440x00
      0x470x00
      0x510x80
      0x540x80
      0x570x80
      0x750x00
      ②THROUGH MODE
      I2C
      Address
      Register
      Address
      SET
      Value
      0x400x010xA4
      0x020x40
      0x030x01
      0x050x00
      0x060x00
      0x200x80
      0x280x80
      0x290x80
      0x2A0x80
      0x2B0x80
      0x2C0x80
      0x300xFF
      0x410x00
      0x440x00
      0x470x00
      0x510x00
      0x540x00
      0x570x00
      0x750x00
    •