BD7682FJ-LB - 技術資料

本產品為適合工具機市場,並保證可長期供應的RANK產品。是最適合近來各式應用裝置使用的產品。準諧振控制器型DC/DC轉換器BD7682FJ-LB提供具有插座的所有產品最適合的系統。因準諧振動作可軟開關,協助低EMI。可外接開關MOSFET及電流檢測電阻。因此可提供高自由度的電源設計。內建Brown Out功能,監控輸入電壓,保持系統在最佳狀態。內建BURST模式,減少輕負載時的功率。BD7682FJ-LB內建緩啟動、BURST模式、各循環的過電流限制、過電壓保護、過負載保護、Brown Out等各種功能。內建閘極箝位電路使SIC-MOSFET擁有最佳驅動狀態。

SCT2H12NZ(1700V SiC-MOSFET) and BD7682FJ-LB(AC/DC Converter IC) Evaluation Board
BD7682FJ-LB-EVK-402 [Input: AC 400-690V , Output: 24V DC]
Application Note , Presentation Document , Buy Evaluation Board
BD7682FJ-EVK-301 [Input: AC 210-480V DC 300-900V , Output: 12V DC]
Application Note, Evaluation Board User Guide, Quick Start Guide, Inquiry Evaluation Board

Quick Start Guide

QUICK START GUIDE for BD7682FJ-LB-EVK-302
 
This quick start guide will help you understand the connection, operating Instructions and important notices and warnings that need to be carefullyreviewed prior to use of the board
Quick Start Guide
 
BD7682FJ-EVK-301 BOARD QUICK START GUIDE

User's Guide

100 W Auxiliary Power Supply Eval Board BD7682FJ-LB-EVK-302
 
This document describes an evaluation board consisting for a 100W auxiliary power supply solution around the BD7682FJ AC/DC quasi-resonant flyback control IC and the SCT2H12NZ, a 1700V SiC MOSFET.
BD7682FJ-EVK-402 Evaluation Board User's Guide
 
For driving SiC (Silicon Carbide) MOSFET. The evaluation board outputs 24 V voltage from the input of 300 Vdc to 900 Vdc. The output current supplies up to 1 A.
BD7682FJ-EVK-301 Evaluation Board User's Guide
 
For driving SiC (Silicon Carbide) MOSFET. This board is able to operate with both AC and DC input voltages. It is therefore possible to derive the power directly from the grid or from the system DC link, after the PFC stage. In case of AC input, the accepted input voltage range goes from 210 VAC to 480 VAC. In case of DC input, the input range goes from 300 VDC to 900 VDC.

Application Note

BD7682FL-LB Application Note
 
Quasi-resonant auxiliary power supply with 1700V SiC MOSFET
Thermal Resistance
 
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
Impedance Characteristics of Bypass Capacitor
 
This application note focuses on the impedance characteristics of capacitors, and explains cautions for selecting bypass capacitors.
Part Explanation
 
For ICs