BD9P155EFV-C (新產品)
Nano Pulse Control™, 3.5V~40V輸入, 1A 5.0V輸出, 車電一次側DC/DC轉換器

BD9P系列是兼顧高速回應和高效率的42V耐壓車電一次側DC/DC轉換器IC。其特點是透過Nano Pulse Control™實現的穩定且較大的降壓比、透過擴頻功能實現的低EMI(低雜訊)、在電池剛啟動時也能穩定供電的高速回應性能,有助於降低系統功耗和降低BOM成本。
包括ADAS的感測器、相機、雷達,以及車電資訊娛樂、儀錶板、 BCM(車身控制模組)在內,適用於汽車中要求小型化、高效率化、高可靠性的應用。

Product Detail

 
料號 | BD9P155EFV-CE2
狀態 | 推薦品
封裝 | HTSSOP-B20
單位數量 | 2500
最小包裝數量 | 2500
包裝形式 | Taping
RoHS | Yes

功能安全:

類別 : FS supportive
A product that has been developed for automotive use and is capable of supporting safety analysis with regard to the functional safety.

規格:

Grade

Automotive

Common Standard

AEC-Q100 (Automotive Grade)

ch

1

Integrated FET / Controller

Integrated FET

Topology

Buck

Synchronous / Nonsynchronous

Synchronous

Vin1(Min.)[V]

3.5

Vin1(Max.)[V]

40.0

Vout1(Min.)[V]

5.0

Vout1(Max.)[V]

5.0

Iout1(Max.)[A]

1.0

SW frequency(Max.)[MHz]

2.2

Light Load mode

Yes

EN

Yes

PGOOD

Yes

Operating Temperature (Min.)[°C]

-40

Operating Temperature (Max.)[°C]

125

Package Size [mm]

6.5x6.4 (t=1)

功能:

  • Nano Pulse Control™
  • AEC-Q100 Qualified (Grade 1)
  • Minimum ON Pulse 50 ns (Max)
  • Synchronous Buck DC/DC Converter Integrating POWER MOSFETs
  • Soft Start Function
  • Current Mode Control
  • Reset Function
  • Quiescent Current 10 µA (Typ) with 12 V Input to 5.0 V Output
  • Light Load Mode (LLM)
  • Forced Pulse Wide Modulation (PWM) Mode
  • Phase Compensation Included
  • Selectable Spread Spectrum Switching
  • External Synchronization Function
  • Selectable Over Current Protection (OCP)
  • Input Under Voltage Lockout (UVLO) Protection
  • Thermal Shut Down (TSD) Protection
  • Output Over Voltage Protection

Evaluation
Board

 
    • Evaluation Board
    • BD9P1x5EFV-TSB-001
    • This Evaluation Board was developed for ROHM’s single 2.2MHz buck DC/DC converter BD9P1x5EFV-C. BD9P1x5EFV-C Series are current mode synchronous buck DC/DC converter integrating POWER MOSFETs. The BD9P1x5EFV-C series accepts a power supply input range of 3.5V to 40V and generates a maximum output current of 1A.

  • User's Guide Purchase Inquiry

Design Resources

 

Documents

White Paper

  • Cutting-Edge Web Simulation Tool “ROHM Solution Simulator” Capable of Complete Circuit Verification of Power Devices and Driver ICs
  • For Automotive ADAS/Infotainment application, CISPR25 Class5 compliant 8 rails power tree Reference Design with power rail monitoring for supporting functional safety

User's Guide

  • Evaluation Board User's Guide for BD9P1x5EFV-C series

Technical Articles

Schematic Design & Verification

  • Calculation of Power Dissipation in Switching Circuit
  • Considering Input Filter to Reduce Conducted Emissions by DCDC Converter
  • Considering Polarity of Power Inductor to Reduce Radiated Emission of DC-DC converter
  • Method for Monitoring Switching Waveform
  • PCB Layout Techniques of Buck Converter
  • Phase Compensation Design for Current Mode Buck Converter
  • Bootstrap Circuit in the Buck Converter
  • Method for Determining Constants of
  • Power Supply Sequence Circuit with General Purpose Power Supply IC
  • Suppression Method of Switching Noise Using Linear Regulator and Low Pass Filter
  • Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)
  • Usage of SPICE Macromodel for DC/DC
  • Snubber Circuit for Buck Converter IC
  • Efficiency of Buck Converter
  • Calculation of Power Loss (Synchronous)
  • Inductor Calculation for Buck converter IC
  • Considerations for Power Inductors Used for Buck Converters
  • Capacitor Calculation for Buck converter IC
  • The Important Points of Multi-layer Ceramic Capacitor Used in Buck Converter circuit
  • Resistor Value Table to set Output Voltage of Buck Converter IC
  • Importance of Probe Calibration When Measuring Power: Deskew
  • Impedance Characteristics of Bypass Capacitor

Thermal Design

  • What Is Thermal Design
  • Basics of Thermal Resistance and Heat Dissipation
  • Method for Calculating Junction Temperature from Transient Thermal Resistance Data
  • Notes for Temperature Measurement Using Thermocouples
  • Two-Resistor Model for Thermal Simulation
  • Notes for Temperature Measurement Using Forward Voltage of PN Junction
  • Thermal Resistance
  • Precautions When Measuring the Rear of the Package with a Thermocouple

Tools

Simulations (Login Required)

「ROHM Solution Simulator」是一款能在ROHM官網上運行的電子電路模擬工具。從零件選擇和元件單體驗證等研發初期階段到系統級的驗證階段,各項模擬工作都可以在Web上執行。ROHM提供的SiC元件等功率元件產品、驅動IC和電源IC等IC產品,都可以在接近實際環境的解決方案電路中輕易地進行驗證,大幅縮短研發週期。
  • BD9P155EFV-C / Frequency Response
  • BD9P155EFV-C / Line Response
  • BD9P155EFV-C / Load Response
  • Simulation Guide for BD9P155EFV-C / Frequency Response (ROHM Solution Simulator)
  • Simulation Guide for BD9P155EFV-C / Line Response (ROHM Solution Simulator)
  • Simulation Guide for BD9P155EFV-C / Load Response (ROHM Solution Simulator)

Calculation Tools

This Calculation Sheet supports the application circuit design of switching regulators. The sheet has formulas necessary for determining peripheral parts. You can easily determine the circuit parameters that meet the desired characteristics by setting the values according to the guidance.
  • Calculation-sheet for the circuit theoretical formula - BD9Pxx5EFV/MUF-C

Models

  • BD9P1x5EFV-C Series Two-Resistor Thermal Model Report

2D/3D/CAD

  • BD9P155EFV-C Footprint / Symbol
  • HTSSOP-B20 Footprint / Symbol
  • HTSSOP-B20 3D STEP Data

Packaging & Quality

Package Information

  • Package Information

Manufacturing Data

  • Factory Information