BD9E303EFJ-LB(E2)
7.0V~36V輸入、3.0A MOSFET內建 1ch同步整流降壓DC/DC轉換器

本產品專為工具機市場設計、並保證可長期供貨的Rank產品。是最適合使用在近來各式應用裝置上的產品。BD9E303EFJ-LB為內建低導通電阻的功率MOSFET同步整流降壓型開關穩壓器。
輸入電壓範圍廣泛(7V~36V)、可製作出5.0V等的低電壓電源。產品為電流模式控制DC/DC轉換器,具備高速暫態響應性能、也可輕鬆設定相位補償。

Product Detail

 
料號 | BD9E303EFJ-LBE2
狀態 | 推薦品
封裝 | HTSOP-J8
單位數量 | 2500
最小包裝數量 | 2500
包裝形式 | Taping
RoHS | Yes

規格:

Grade

Industrial

ch

1

Integrated FET / Controller

Integrated FET

Topology

Buck

Synchronous / Nonsynchronous

Synchronous

Vin1(Min.)[V]

7.0

Vin1(Max.)[V]

36.0

Vout1(Min.)[V]

1.0

Vout1(Max.)[V]

28.8

Iout1(Max.)[A]

3.0

SW frequency(Max.)[MHz]

0.3

Light Load mode

No

EN

Yes

PGOOD

No

Operating Temperature (Min.)[°C]

Tj=-40

Operating Temperature (Max.)[°C]

Tj=150

功能:

  • Long Time Support Product for Industrial Applications.
  • Synchronous single DC/DC converter.
  • Over-Current Protection.
  • Short Circuit Protection.
  • Thermal Shutdown Protection.
  • Under voltage Lockout Protection.
  • Soft Start.
  • HTSOP-J8 package (Exposed Pad).

Evaluation
Board

 
    • Evaluation Board
    • BD9E303EFJ-EVK-001
    • BD9E303EFJ-EVK-001 Evaluation board delivers an output 5.0 volts from an input 7.0 to 36 volts using BD9E303EFJ-LB, a synchronous rectification step-down DC/DC converter integrated circuit, with output current rating of maximum 3A. The output voltage can be set by changing the external parts of circuit and the loop-response characteristics also can be adjusted by the phase compensation circuit.

  • User's Guide Design Data Buy

Design Resources

 

Documents

White Paper

  • White Paper
  • Cutting-Edge Web Simulation Tool “ROHM Solution Simulator” Capable of Complete Circuit Verification of Power Devices and Driver ICs

User's Guide

  • Evaluation Board User's Guide
  • Evaluation Board Data

Application Note

  • PCB Layout for BD9E303EFJ-LB

Reference Design

  • BD9E303EFJ-LB(E2) Reference Circuits and Bomlist

Technical Articles

Schematic Design & Verification

  • Buck DC/DC Converter Recommended Inductor List
  • Calculation of Power Dissipation in Switching Circuit
  • Considering Input Filter to Reduce Conducted Emissions by DCDC Converter
  • Considering Polarity of Power Inductor to Reduce Radiated Emission of DC-DC converter
  • Method for Monitoring Switching Waveform
  • Phase Compensation Design for Current Mode Buck Converter
  • Bootstrap Circuit in the Buck Converter
  • Method for Determining Constants of
  • Power Supply Sequence Circuit with General Purpose Power Supply IC
  • Suppression Method of Switching Noise Using Linear Regulator and Low Pass Filter
  • PCB Layout Techniques of Buck Converter
  • Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)
  • Usage of SPICE Macromodel for DC/DC
  • Snubber Circuit for Buck Converter IC
  • Efficiency of Buck Converter
  • Calculation of Power Loss (Synchronous)
  • Inductor Calculation for Buck converter IC
  • Considerations for Power Inductors Used for Buck Converters
  • Capacitor Calculation for Buck converter IC
  • The Important Points of Multi-layer Ceramic Capacitor Used in Buck Converter circuit
  • Resistor Value Table to set Output Voltage of Buck Converter IC
  • Importance of Probe Calibration When Measuring Power: Deskew
  • Impedance Characteristics of Bypass Capacitor

Thermal Design

  • Two-Resistor Model for Thermal Simulation
  • Notes for Temperature Measurement Using Thermocouples
  • Notes for Temperature Measurement Using Forward Voltage of PN Junction
  • Thermal Resistance
  • Precautions When Measuring the Rear of the Package with a Thermocouple

Tools

Simulations (Login Required)

  • Switching Regulators
    7.0V to 36V Input, 3.0 A Integrated MOSFET, Single Synchronous Buck DC/DC Converter, BD9E303EFJ Frequency Domain

Models

  • BD9E303EFJ-LB(E2) SPICE Model

2D/3D/CAD

  • HTSOP-J8 Footprint / Symbol
  • HTSOP-J8 3D STEP Data

Packaging & Quality

Package Information

  • Package Information
  • Anti-Whisker formation

Manufacturing Data

  • Factory Information

Environmental Data

  • UL94 Flame Classifications of Mold Compound
  • Compliance with the ELV directive
  • REACH SVHC Non-use Declaration
  • RoHS Comission Delegated Directive

Export Information

  • The Export Control Order
  • Export Administration Regulations(EAR)