BD9S300MUF-C
車電用 內建MOSFET 2.7V～5.5V 輸入,3A 1ch同步整流 降壓 DC/DC轉換器
新設計不推薦
BD9S300MUF-C
車電用 內建MOSFET 2.7V～5.5V 輸入,3A 1ch同步整流 降壓 DC/DC轉換器
為了既有客戶所需而生產的產品。對於新設計則不予販售。
Product Detail
功能安全:
規格:
ch
1
Integrated FET / Controller
Integrated FET
Topology
Buck
Synchronous / Nonsynchronous
Synchronous
Vin1(Min.)[V]
2.7
Vin1(Max.)[V]
5.5
Vout1(Min.)[V]
0.8
Vout1(Max.)[V]
4.4
Iout1(Max.)[A]
3
SW frequency setting (Max.)[MHz]
2.2
Light Load mode
Yes
EN
Yes
PGOOD
Yes
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
125
Package Size [mm]
3.0x3.0 (t=1.0)
Common Standard
AEC-Q100 (Automotive Grade)
Thermal Model
/en/products/databook/applinote/ic/power/switching_regulator/bd9s300muf_2resistor_thermalmodel_an-e.pdf
功能:
- SLLM™ (Simple Light Load Mode) Control
- AEC-Q100 Qualified (Grade 1)
- Single Synchronous Buck DC/DC Converter
- Adjustable Soft Start Function
- Power Good Output
- Input Under Voltage Lockout Protection
- Short Circuit Protection
- Output Over Voltage Protection
- Over Current Protection
- Thermal Shutdown Protection
- Wettable Flank QFN Package
參考設計 / 應用評估套件
-
- Evaluation Board - BD9S300MUF-TSB-001
This Evaluation Board was developed for ROHM’s single Synchronous buck DC/DC converter BD9S300MUF-C. It is a synchronous buck DC/DC converter with built-in low On Resistance power MOSFETs. The BD9S300MUF-C accepts a power supply input range of 2.7V to 5.5V and generates a maximum output current of 3A.
-
- Reference Design - REFRPT001
- CISPR25 Class5 compliant 8 rails power tree Reference Design for Automotive ADAS/Infotainment application
This reference design is a power tree solution board developed for infotainment devices such as automotive clusters and center information displays and for ECUs for ADAS application. The power system that can support functional safety is integrated on a single board to achieve the optimal configuration as a power tree. Excellent EMC performance that meets CISPR25 Class 5 even at all power supply rails are enabled, and reduces heat generation of each device by distributing high-efficiency DCDCs. In addition, two supervisor ICs with self-diagnosis functions can monitor the output of all power rails and contribute to a higher level of functional safety.
- Automotive Infotainment/ADAS 8-channels power tree reference design
- Verified to satisfy EMC CISPR 25 class 5 standard without common mode filter
- In order to avoid the AM radio frequency bands All DC/DC converters operate at a switching frequency of 2.2 MHz or higher.
- Thermal characteristics tested
- voltage monitoring for 8-channel power tree to improve the functional safety ASIL level
- Space saving by integrating multiple power trees
Videos & Catalogs
