BD99950MUV
2 Cell / 3 Cell Narrow VDC Charger with SMBus Interface

The BD99950MUV is a high-efficiency, synchronous Narrow VDC system voltage regulator and battery charger controller. It has two charge pumps which separately drive N-channel MOSFETs for automatic system power source selection. Charge voltage, charge current, AC adapter current and minimum system voltage can be programmed through SMBus. With a small inductor, PWM switching frequency can also be programmed by SMBus up to 1.2MHz.

Data Sheet 購買 *
* 本產品是標準級的產品。
本產品不建議使用的車載設備。

Product Detail

 
料號 | BD99950MUV-E2
狀態 | 推薦品
封裝 | VQFN20PV3535
單位數量 | 2500
最小包裝數量 | 2500
包裝形式 | Taping
RoHS | Yes

規格:

Grade

Standard

Supply Voltage(Min.)[V]

6

Supply Voltage(Max.)[V]

24.0

Charge Voltage [V]

8.4±0.5%

Operating Temperature (Min.)[°C]

-10

Operating Temperature (Max.)[°C]

85

Package Size [mm]

3.5x3.5 (t=1)

功能:

  • N-channel MOSFETs available for Battery or
    Adapter Selection via Internal Charge Pumps
  • Fast DPM Transient Response under Turbo Mode (<100µs)
  • Linear Mode Trickle Charge via BGATE Charge Pump
  • Low Operating Current BGATE Charge Pump at 17µA (typical)
  • MLCC Output Capacitor
  • High Light Load Efficiency for Energy Star and ErP Lot6
  • Fast Load Current Transient Response under
    No Battery or Dead Battery conditions
  • NMOS-NMOS Synchronous Step-Down Controller
  • Programmable 600kHz-1.2MHz Switching Frequency
  • Programmable Charge Voltage (16mV resolution),
    Charger Current (64mA resolution),
    Input Current (64mA resolution),
    Minimum System Voltage (64mV resolution)
  • ±0.5% Charge Voltage Accuracy
  • ±3% Charge Current Accuracy
  • ±3% Input Current Accuracy
  • ±0.5% Minimum System Voltage Accuracy
  • ±2% 20x Input Current Amplifier Output Accuracy
  • Integrated Loop Compensation
  • Battery Learn Function
  • AC Adapter Operating Range : 6.0V to 24.0V
  • Off-State Battery Discharge Current at 15µA
  • 20pin 3.5mm×3.5mm QFN Package

Design Resources

 

Technical Articles

Schematic Design & Verification

  • Importance of Probe Calibration When Measuring Power: Deskew
  • Impedance Characteristics of Bypass Capacitor

Thermal Design

  • What Is Thermal Design
  • Basics of Thermal Resistance and Heat Dissipation
  • Method for Calculating Junction Temperature from Transient Thermal Resistance Data
  • Thermal Resistance

Tools

2D/3D/CAD

  • VQFN20PV3535 STEP Data

Packaging & Quality

Package Information

  • Package Information
  • Anti-Whisker formation

Manufacturing Data

  • Factory Information

Environmental Data

  • UL94 Flame Classifications of Mold Compound
  • Compliance with the ELV directive
  • REACH SVHC Non-use Declaration
  • RoHS Comission Delegated Directive

Export Information

  • The Export Control Order
  • Export Administration Regulations(EAR)