BD63725BEFV
高性能、高可靠性36V耐壓 步進馬達驅動器

BD63725BEFV是額定電源36V、額定輸出電流2.5A的低功耗雙極PWM恒流驅動器。輸入介面採用CLK-IN驅動方式,透過內建DAC,勵磁模式可適用於FULL STEP、HALF STEP(2種)、QUATER STEP模式。電流衰減方式方面可任意設定FAST DECAY/SLOW DECAY的比率,可對所有馬達實現最佳控制狀態。另外,也可使用一個系統電源進行驅動,有助於提高應用設計的便利性。

Data Sheet 購買 *
* 本產品是標準級的產品。
本產品不建議使用的車載設備。

Product Detail

 
料號 | BD63725BEFV-E2
狀態 | 推薦品
封裝 | HTSSOP-B28
單位數量 | 2500
最小包裝數量 | 2500
包裝形式 | Taping
RoHS | Yes

規格:

Grade

Standard

Vcc (Max.)[V]

36.0

Power Supply Voltage (Max.) [V]

28.0

Power Supply Voltage (Min.) [V]

19.0

Iout (Max.)[A]

2.5

Iout Peak (Max.)[A]

3

Output On Resistance (Typ.)[Ω]

0.35

Interface

CLK-IN

Step

to 1 / 4

MIX DECAY Function

Yes

Single power supply input

Yes

Automotive class

No

Operating Temperature (Min.)[°C]

-25

Operating Temperature (Max.)[°C]

85

Package Size [mm]

9.7x6.4 (t=1)

功能:

  • Rated output current (DC) 2.5A
  • Low ON resistance DMOS output
  • CLK-IN drive mode
  • PWM constant current (other oscillation)
  • Built-in spike noise cancel function
    (external noise filter is unnecessary)
  • Full-, half (two kinds)-, quarter-step functionality
  • Freely timing excitation mode switch
  • Current decay mode switch (linearly variable FAST/SLOW DECAY ratio)
  • Normal rotation & reverse rotation switching function
  • Power save function
  • Built-in logic input pull-down resistor
  • Power-on reset function
  • Thermal shutdown circuit (TSD)
  • Over-current protection circuit (OCP)
  • Under voltage lock out circuit (UVLO)
  • Over voltage lock out circuit (OVLO)
  • Ghost Supply Prevention
    (protects against malfunction when power supply is disconnected)
  • Adjacent pins short protection
  • Microminiature, ultra-thin and high heat-radiation
    (exposed metal type) package

Evaluation
Board

 
    • Evaluation Board
    • BD63725BEFV-EVK-001
    • This evaluation board is a board for driving the stepping motor with a ROHM's stepping motor driver BD63725BEFV. Motor drive and driver The motor can be driven by VCC for power supply and 5V power supply for control signal. Drive / stop and excitation modes can be set with an external switch. The input interface adopts the CLK-IN drive system, and the excitation mode supports FULL STEP, HALF STEP, QUATER STEP, 1/8 STEP, and 1/16 STEP mode by the built-in DAC.

  • User's Guide Buy
    • Evaluation Board
    • RAGU-main1-EVK-001
    • The RAGU is Evaluation Tool controls the stepping motor driver IC to demonstrate and evaluate its functions

  • User's Guide Buy Detail
    • Evaluation Board
    • RAGU-op1-EVK-001
    • The RAGU is Evaluation Tool controls the stepping motor driver IC to demonstrate and evaluate its functions

  • User's Guide Buy Detail