BD63715AEFV
高性能、高可靠性36V耐壓步進馬達驅動器

BD63715AEFV是額定電源36V、額定輸出電流1.5A的低功耗雙極PWM恆流驅動器。輸入介面採用CLK-IN驅動方式,通過內建DAC,勵磁模式可適用於FULL STEP、HALF STEP(2種)、QUATER STEP模式。電流衰減方式方面可任意設定FAST DECAY/SLOW DECAY的比率,可對所有馬達實現最佳控制狀態。另外,也可使用一個系統電源進行驅動,有助於提高整機設計的便利性。

Data Sheet 購買 *
* 本產品是標準級的產品。
本產品不建議使用的車載設備。

Product Detail

 
料號 | BD63715AEFV-E2
狀態 | 推薦品
封裝 | HTSSOP-B28
單位數量 | 2500
最小包裝數量 | 2500
包裝形式 | Taping
RoHS | Yes

規格:

Grade

Standard

Vcc (Max.)[V]

36.0

Power Supply Voltage (Max.)[V]

28.0

Power Supply Voltage (Min.)[V]

19.0

Iout (Max.)[A]

1.5

Iout Peak (Max.)[A]

2

Output On Resistance (Typ.)[Ω]

0.95

Interface

CLK-IN

Step

to 1 / 4

MIX DECAY Function

Yes

Single power supply input

Yes

Automotive class

No

Operating Temperature (Min.)[°C]

-25

Operating Temperature (Max.)[°C]

85

功能:

· Rated output current(DC)1.5A
· Low ON resistance DMOS output
· CLK-IN drive mode
· PWM constant current (other oscillation)
· Built-in spike noise cancel function
  (external noise filter is unnecessary)
· Full-, half (two kinds)-, quarter-step functionality
· Freely timing excitation mode switch
· Current decay mode switch
  (linearly variable FAST/SLOW DECAY ratio)
· Normal rotation & reverse rotation
  switching function
· Power save function
· Built-in logic input pull-down resistor
· Power-on reset function
· Thermal shutdown circuit (TSD)
· Over-current protection circuit(OCP)
· Under voltage lock out circuit (UVLO)
· Over voltage lock out circuit (OVLO)
· Ghost Supply Prevention (protects against
  malfunction when power supply is disconnected)
· Adjacent pins short protection
· Microminiature, ultra-thin and high heat-radiation
  (exposed metal type) package

Evaluation
Board

 
    • Evaluation Board
    • BD63715AEFV-EVK-001
    • This evaluation board is a board for driving the stepping motor with a ROHM's stepping motor driver BD63715AEFV. Motor drive and driver The motor can be driven by VCC for power supply and 5V power supply for control signal. Drive / stop and excitation modes can be set with an external switch. The input interface adopts the CLK-IN drive system, and the excitation mode supports FULL STEP, HALF STEP, QUATER STEP, 1/8 STEP, and 1/16 STEP mode by the built-in DAC.

  • User's Guide Buy

Design Resources

 

Documents

User's Guide

  • Evaluation Board User's Guide for BD63xxxEFV-EKV-001

Technical Articles

Schematic Design & Verification

  • Method for Monitoring Switching Waveform
  • Importance of Probe Calibration When Measuring Power: Deskew
  • Impedance Characteristics of Bypass Capacitor

Thermal Design

  • What Is Thermal Design
  • Method for Calculating Junction Temperature from Transient Thermal Resistance Data
  • Two-Resistor Model for Thermal Simulation
  • Notes for Temperature Measurement Using Thermocouples
  • Notes for Temperature Measurement Using Forward Voltage of PN Junction
  • Thermal Resistance
  • Precautions When Measuring the Rear of the Package with a Thermocouple

Tools

2D/3D/CAD

  • HTSSOP-B28 Footprint / Symbol
  • HTSSOP-B28 3D STEP Data

Packaging & Quality

Package Information

  • Package Information
  • Anti-Whisker formation

Manufacturing Data

  • Factory Information

Environmental Data

  • UL94 Flame Classifications of Mold Compound
  • Compliance with the ELV directive
  • REACH SVHC Contained Report
  • RoHS Comission Delegated Directive

Export Information

  • The Export Control Order
  • Export Administration Regulations(EAR)