BD67871MWV-Z (新產品)
TriC3™ 4.5 V to 60 V, Three-phase Brushless DC Motor Gate Driver
BD67871MWV-Z (新產品)
TriC3™ 4.5 V to 60 V, Three-phase Brushless DC Motor Gate Driver
BD67871MWV-Z is mounted an Innovative Active Gate Drive (TriC3™) which suppresses EMI and reduces heat generation of MOSFET power devices in motor drive systems. TriC3™ achieves these functions by monitoring various voltages around the MOSFET power device and using this voltages information to intelligently control the gate drive current of the MOSFET power device. It is a gate driver IC designed for three-phase brushless DC motor applications. It can drive three half-bridges consisting of six N-Channel power MOSFETs up to 60 V. It has synchronous rectification function during bootstrap capacitor charging for efficiency. Despite the TriC3™ being a type of constant-current drive, it enables 100 % PWM Duty Cycle and high-impedance by trickle charge pumping.
Product Detail
規格:
Vcc (Max.)[V]
65
Power Supply Voltage (Max.) [V]
60
Power Supply Voltage (Min.) [V]
4.5
Iout (Max.)[A]
0.5
External FET
N+N
Speed Control Input
PWM
For Fan Motor
-
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
125
Package Size [mm]
4.0x4.0 (t=1.0)
功能:
- Innovation Active Gate Drive (TriC3™)
Multi Level Gate Drive Current Control
Real Time Gate Current Control Based on Information Sensed from the Output State
Dead Time Adjustment Control - 60 V Three-phase Brushless DC Motor Gate Driver
Wide 4.5 V to 60 V Input Voltage Range - Bootstrap based Gate Driver Architecture
Synchronous Rectification Function during Bootstrap Capacitor Charging
Bootstrap Gate Driver with Current Source Circuit for 100 % Duty Cycle Operation and High-impedance (Hi-Z) State - Super Low IVCCQ (< 1 μA at Sleep Mode)
- Supports 3.3 V, and 5 V Logic Inputs
- Supports Negative Transients up to -5 V on *_SH
- Supports IN/IN, and EN/IN Mode by UART
- Compact QFN Packages and Footprints
- UART Communication Protocol
- TriC3™ Base Current can be selected as External Resistor or Internal Constant Current
- Gate Driver Power Supply (VREG) has LDO and Charge Pump Functions
- SHUNT pin allows Current Detection with External Resistors
- Integrated Protection Features
VCC UVLO Protection
Bootstrap (V*_BST-*_SH ) UVLO Protection
VREG UVLO Protection
Thermal Shutdown
Fault Condition Indicator (xFAULT)
