ROHM Product Detail

新設計不推薦

RSF014N03

4V驅動N溝道MOSFET
Data Sheet

新設計不推薦 RSF014N03
4V驅動N溝道MOSFET

Data Sheet
Data Sheet
料號 | RSF014N03TL
封裝 | TUMT3
包裝形式 | Taping
單位數量 | 3000
最小包裝數量 | 3000
RoHS | Yes

Quick Download

 
Data Sheet Land Pattern Package Dimensions MSL LTSpice Model SPICE Model Thermal Model
 

Description

為了既有客戶所需而生產的產品。對於新設計則不予販售。

Product Detail

Specifications

Specifications

Package Code

SOT-323T

JEITA Package

SC-113A

Number of terminal

3

Polarity

N

Drain-Source Voltage VDSS[V]

30

Drain Current ID[A]

1.4

RDS(on)[Ω] VGS=4V(Typ)

0.27

RDS(on)[Ω] VGS=4.5V(Typ)

0.25

RDS(on)[Ω] VGS=10V(Typ)

0.17

RDS(on)[Ω] VGS=Drive (Typ)

0.27

Total gate charge Qg[nC]

1.4

Power Dissipation (PD)[W]

0.8

Drive Voltage[V]

4

Mounting Style

Surface mount

Storage Temperature (Min)[℃]

-55

Storage Temperature (Max)[℃]

150

Package Size [mm]

2.1x2.0 (t=0.82)

Features

· 4V驅動型
· N溝道中功率MOSFET
· 開關速度快
· 小型表面貼裝封裝
· 無鉛/符合RoHS
推薦產品搜索

Reference Design / Evaluation Tool

    • Reference Design - REF68022
    • Ultra-compact, ultra-thin NFC wireless power supply (100 mW)

    • The ML7671RD3-EVK-001 is equipped with the ML7671 LSI on the transmitter side, while the ML7670RD3-EVK-001 incorporates the ML7670 LSI on the receiver side. By aligning the antennas, the system can charge a battery with a power transfer of 100 mW. This reference design enables wireless power transfer using an ultra‑compact, ultra‑thin PCB. Because it is built on an FPC substrate, it can also be integrated into curved enclosures such as smart rings.

    • Reference Design - REF67011
    • NFC Telemetry-Based Rotating Component Torque Sensing

    • In this reference design, a strain sensor and the ML7660-EVK-002 are attached to the shaft. It is now possible to directly measure and collect data on the strain of the rotating shaft, which was previously impossible.

      Specifically, the measurement process follows these steps:
      1) The power supply LSI wirelessly supplies power to the power receiving LSI.
      2) The power receiving LSI supplies power to the strain sensor via a wired connection.
      3) The strain sensor measures the strain of the rotating shaft.
      4) The strain sensor sends the strain measurement data to the power receiving LSI via a wired connection.
      5) The power receiving LSI wirelessly transmits the measurement data to the power supply LSI.

      This reference design uses the STREAL SR300 sensor manufactured by Macnica. If you plan to use Macnica sensors, please check directly with Macnica for availability and procurement details in advance.
      https://www.macnica.co.jp/en/business/semiconductor/macnica_products/streal/

X

Most Viewed