BD1HC500FVM-C
車用1ch High Side 開關
BD1HC500FVM-C
BD1HC500FVM-C
車用1ch High Side 開關
BD1HC500FVM-C是車用1ch High Side 開關。內建過電流限制電路、熱關斷電路、Open檢測電路、減壓保護電路，具有異常檢出時診斷輸出功能。
Product Detail
功能安全:
類別 : FS supportive
A product that has been developed for automotive use and is capable of supporting safety analysis with regard to the functional safety.
規格:
Generation
GEN1
Function
Standard / Error Flag
Channel Number [ch]
1
Drain-Source Voltage (Max.)[V]
44.5
Output Current[A]
0.8
ON Resistance(Max.)[mΩ]
1200
ON Resistance(Typ.)[mΩ]
500
Over Current Detect [A]
0.8
Active Clamp Energy [mJ]
33
UVLO Detection Voltage(Max.)[V]
3.6
Supply Voltage(Min.)[V]
4
Supply Voltage(Max.)[V]
18
Current consumption(Typ.)[µA]
1500
Thermal Shut Down
Off-Latch
Open Load Detect [V]
2.8
Status Terminal
Available
Junction Temperature Tj (Min.)[°C]
-40
Junction Temperature Tj (Max.)[°C]
150
Package Size [mm]
2.9x4 (t=0.9)
Common Standard
AEC-Q100 (Automotive Grade)
功能:
- Built-in overcurrent protection circuit
- Built-in Thermal Shut Down (TSD)
- Built-in Open Load Detection circuit (When Output is OFF)
- Possibility to control directly from CMOS logic IC
- Low standby current
- Built-in Under Voltage Lock Out circuit
- Built-in diagnostic (ST) output function
- Low On resistance of RDS (ON) =500mΩ (Typ) (VDD=12V, Ta=25°C, IOUT=0.25A)
- Monolithic power IC that has a built in control part (CMOS) and a power MOS FET on 1chip
- 1ch High-side switch for the mechanical relay coil drive
- AEC-Q100 qualified(Grade 1)
