BS2132F
自舉二極體內建 600V耐壓 3相橋驅動器

BS2132F是可驅動使用陰極負載方式的外接Nch-FET及IGBT的600V高耐壓3相橋驅動器。VCC-VB之間內建600V耐高壓的自舉二極體。輸入邏輯電源電壓可使用3.3V及5.0V兩種。作為保護功能,在VCC-COM之間及VB-VS之間搭載低輸入誤動作防止電路(UVLO)及過流保護電路(OCP)。此外,為輸出保護監測訊號,搭載了FAULT端子,還可透過RCIN端子上連接的RC的時間常數調整OCP檢測保持時間。

Data Sheet 購買 *
* 本產品是標準級的產品。
本產品不建議使用的車載設備。

Product Detail

 
料號 | BS2132F-E2
狀態 | 推薦品
封裝 | SOP28
單位數量 | 1500
最小包裝數量 | 1500
包裝形式 | Taping
RoHS | Yes

規格:

Grade

Standard

Channel

6

High-side floating supply voltage [V]

600

Min Output Current Io+ [mA]

200

Min Output Current Io- [mA]

350

Turn-on/off time (Typ.) [ns]

630/580

Dead time (Typ.) [ns]

300

Offset supply leakage current (Max.) [µA]

50

Vcc(Min.)[V]

11.5

Vcc(Max.)[V]

20.0

Operating Temperature (Min.)[°C]

-40

Operating Temperature (Max.)[°C]

125

功能:

  • High-Side Floating Supply Offset Voltage Range to 600V
  • Gate Drive Supply Range from 11.5V to 20V
  • Integrated 600V High Voltage Bootstrap Diode between the VCC pin and the VB pin
  • Built-in Undervoltage Lockout (UVLO) for Both Channels
  • Built-in High Precision (0.46V±5%) Over Current Protection (OCP) Circuit
  • Built-in the Enable Pin (EN) which Enable I/O Functionality
  • Built-in the /FAULT pin which is Protection Detecting Signals (OCP and UVLO) output pin
  • RCIN Pin can determine the OCP holding time by External Resistance and Capacitance
  • 3.3V and 5.0V Input Logic Compatible
  • Output in Phase with Input

Design Resources

 

Documents

White Paper

  • Cutting-Edge Web Simulation Tool “ROHM Solution Simulator” Capable of Complete Circuit Verification of Power Devices and Driver ICs

Application Note

  • BS2132F Application Note

Technical Articles

Schematic Design & Verification

  • Method for Monitoring Switching Waveform
  • Importance of Probe Calibration When Measuring Power: Deskew
  • Impedance Characteristics of Bypass Capacitor

Thermal Design

  • Thermal Resistance

Packaging & Quality

Manufacturing Data

  • Factory Information

Environmental Data

  • REACH SVHC Non-use Declaration