User's Guide
- Evaluation Board User's Guide
BM92A13MWV
BM92A13MWV
USB Type-C Power Delivery 控制器
BM92A13是支援使用base-band的USB Power Delivery的全功能USB Type-C Power Delivery控制器。符合UTB Type-C標準和USB Power Delivery標準。BM92A13支援USBPD的策略引擎，透過主機介面與Embedded控制器或SoC進行通信。支持SOP、SOP'、SOP'' ，與線材製造商IC進行通信，支援alternate模式。
Product Detail
規格:
Supply Voltage(Min.)[V]
3.1
Supply Voltage(Max.)[V]
20.0
Power Role
Sink
Data Role
UFP
Alternate Mode
No
Dead Battery Support
Yes
Policy Manager
Integrated
Connected the Required Initial Voltage
15V
Operating Temperature (Min.)[°C]
-30
Operating Temperature (Max.)[°C]
105
功能:
- USB Type-C Specification compatible
- USB PD Specification compatible (BMC-PHY)
- Connected the required initial voltage is 15V
- Request current depends on the far-end device
- Start of automatic power receiving without Ext-MCU
- Two channel power path control using N-channel MOSFET drivers with back flow prevention
- Type-C cable orientation detection
- Built-in VCONN Switch and VCONN controller
- Direct VBUS powered operation
- Initial Role is UFP mode (Supports DFP/DRP mode)
- Supports Dead Battery operation
- SMBus Interface for Host Communication
Evaluation
Board
-
- Evaluation Board
- BM92A13MWV-EVK-001
This board is dedicated to receiving power with USB Type-C Power Delivery. BM92A12MWV-EVK-001 requests a voltage of 20V, BM92A13MWV-EVK-001 requests a voltage of 20V, and BM92A14MWV-EVK-001 requests a voltage of 9V. If you want to check the operation of Power Delivery, please prepare power supply capable USB Type-C Power Delivery device and USB Type-C dedicated cable. Please use selling separately “BM92A21MWV-EVK-001” for power supply capable USB Type-C Power Delivery device.
Design Resources
Documents
User's Guide
- Evaluation Board User's Guide
Technical Articles
Schematic Design & Verification
- Impedance Characteristics of Bypass Capacitor
Thermal Design
- Thermal Resistance
Packaging & Quality
Manufacturing Data
- Factory Information
Environmental Data
- REACH SVHC Non-use Declaration